JSON-LD markup generated by Google Structured Data Markup Helper.

Ford

Home / Ford

We Service and Repair all Ford cars

  • 2015 Ford Explorer

    Ford Explorer
    Mileage
    104,285
    Service Date
    12/29/2025
    Services Performed
    • Tech found power to starter but starter would not engage. Advised to replace starter
    • STARTER ASSEMBLY – Remove & Replace
     
    Robert C. gave our service a 5 star review on 1/2/2026
  • 2005 Ford Mustang

    Ford Mustang
    Mileage
    130,837
    Service Date
    12/3/2025
    Services Performed
    • tech notes of several notes- 1st noise – Clutch – noise when clutch engaged. Rear end differential noise – fluid level low (leaking at cover & dr side axle seal) Metal on drain plug. ABS light on. Front wheel bearings -left and right side – play / vibration. Power steering pump leaking – return hose leaking. Lower control arm bushings broken. ABS light on.
    • WHEEL HUB – Remove & Replace – Front,Both
     
    Steven S. gave our service a 5 star review on 12/4/2025
  • 2007 Ford Ranger

    Ford Ranger
    Mileage
    105,592
    Service Date
    10/30/2025
    Services Performed
    • -drain engine oil & refill with replacement of filter.
    • Replace Positive Battery Terminal
     
    PHILLP B. gave our service a 5 star review on 10/30/2025
  • 2015 Ford Explorer

    Ford Explorer
    Mileage
    102,889
    Service Date
    10/29/2025
    Services Performed
    • Power to starter from main cable ok 12.4 volts. Codes in PATS: B10D7-87 PaTS KEY – MISSING message, B10D9-87 – PATS Transponder – missing message. Advised to replace key w/ OE Factory key and Transciever in ignition switch.
    • Cut & Program Key
    • Back up Camera – doesn't work at times.
    • Transceiver Replacement
    • PARKING AID CAMERA – Remove & Replace
     
    Robert C. gave our service a 5 star review on 10/29/2025
  • 2013 Ford Edge

    Ford Edge
    Mileage
    108,511
    Service Date
    8/22/2025
    Services Performed
    • DTC in system P2195 -00 oxygen sensor signal biased /stuck lean, P0113 intake air temp sensor 1 circuit high b1, P0102 mass air flow sensor A circuit low. tech found hose with check valve bad. cause of failure – brake booster – causing vacuum issue with engine;
    • brake booster hose check valve inside bad – need to replace first and recheck system
    • Post fix all monitors set at this time Fuel trim at 6 –
    • POWER BRAKE BOOSTER – Remove & Replace – V6 – [Includes: R&I Upper Intake Manifold Gasket.]
    • Perform Brake EXCHANGE w/ BG Brake Fluid (BG84032 Brake Fluid)
     
    Antoinette M. gave our service a 5 star review on 8/22/2025
  • 2007 Ford Ranger

    Ford Ranger
    Mileage
    104,601
    Service Date
    7/24/2025
    Services Performed
    • -drain engine oil & refill with replacement of filter.
    • Tire Rotation
     
    PHILLP B. gave our service a 5 star review on 7/25/2025
  • 2018 Ford Explorer

    Ford Explorer
    Mileage
    99,509
    Service Date
    4/30/2025
    Services Performed
    • seat belt replace as per customer – seat belt buckle not working.
     
    Thelma P. gave our service a 5 star review on 4/30/2025
  • 2010 Ford Focus

    Ford Focus
    Mileage
    206,241
    Service Date
    1/28/2025
    Services Performed
    • -drain engine oil & refill with replacement of filter.
    • Power Steering Pump LARGE leak, Advised to replace.
    • seal at connection to pump continuing to leak – advised fitting needs seal. together with hose assembly
     
    Melissa D. gave our service a 5 star review on 1/29/2025
  • 2007 Ford Ranger

    Ford Ranger
    Mileage
    102,776
    Service Date
    1/2/2025
    Services Performed
    • Tire Rotation
    • -drain engine oil & refill with replacement of filter.
    • sway bar link bushings broken
    • front shock lower bushings broken – dry rot cracking.
     
    PHILLP B. gave our service a 5 star review on 1/3/2025
  • 2010 Ford Pickup

    Ford Pickup
    Mileage
    165,217
    Service Date
    11/1/2024
    Services Performed
    • dtc in system -p0016-00 crankshaft position – camshaft position correlation Bank1 Sensor A, P0130-00o2 Sensor Circuit B1S1, P0457-00 Evap System Leak Detected (fuel cap loose /off). Engine oil level very low on vehicle. – Not registering on dip stick. VVT solenoid tested power &ground no change in solenoid = failure. Smoke test on Evap system found filler neck leaking – tested purge solenoid – sticking at times.
    • FUEL TANK FILLER PIPE – Remove & Replace – F150 Rear,Two Piece Driveline,w/Skid Plate – [Includes: R&I Driveshaft.]
    • CANISTER PURGE SOLENOID – Remove & Replace – Purge Valve – [Includes: Validation with use of Scan Tool.] – [Includes: Component test.]
    • Smoke Test
    • Synthetic Blend Oil
    • B1S1
    • Includes replacement of tensioner & timing guide on pass side. Includes replacement of VVT Solenoid –during VVT replacement – tech found timing guide off trackRight side gear damaged – Most likely cause of failure was due to lack of oil in system.
    • Note: OBD Permanent code – P0016 Crankshaft Position -Camshaft Position Correlation B1SensorA – Vehicle will need to be driven for system to clear permanent code. Not all Monitors set at this time. – customer advised to bring back on Monday to have monitors checked for completion
     
    Arvey O. gave our service a 5 star review on 11/7/2024